MMC2 / MMC4 / MMC8 / MMC16

Products

Products
Receiver Multicouplers
MMC2 / MMC4 / MMC8 / MMC16

100-500MHz Wideband Multicoupler

Active receiver multicoupler for VHF and UHF bands (100MHz to 500MHz) in several sub bands. Complete system in a 1U 19” rack (2, 4, 8 Channels) and 2U 19” rack (12 and 16 Channels). High dynamic range amplifier with very low Noise Figure of less than 2dB, typically 1dB to 1.6dB for best S/N ratio. High isolation of over 20dB between receiver output ports. Low RF output power output imbalance between output ports. Strong RF input capability. 100-240VAC mains input and 12/24VDC DC input. Automatic change over from AC to DC power and vice versa in case of either power input failure. Separately fused AC power and front panel mounted amplifier DC power. Amplifier power “On” LED on front panel for easy checking. “N” type input and output connectors, other types optional on request. Blue acrylic painted front panel with anodized aluminum casing. Passive narrow and wide “Band Pass” and “Band Reject” filters are available on request to eliminate off frequency high power transmissions and interference.

SPECIFICATIONS
GRAPH
LEAFLET

Model No	MMC Series
Electrical Specifications
Frequency Range	100-500MHz
Number of Channels	2 / 4 / 8 / 16
Amplifier Noise Figure	<2dB
Insertion Loss or Nominal Gain	Between 0 and +3dB set at order
Isolation Output to Output	>20dB
Impedence	50Ω Nominal
Mechanical Specifications
Operating Temperature Range	-30˚to +60˚C
Weight	Between 2.3 and 3.7kg depending on number of channels
Connector Type	N-Type Female
Mounting	19” Rack / 1U Height (2U for 16ch)

Mavitek MMC Series Wideband Multicoupler English Datasheet

İNDİR

RELATED SERIES